��������-�������

HOMEPAGE

ABOUT THE METHOD

SOFTWARE FEATURES

BENEFITS SOFTWARE

DOWNLOAD

WHAT'S NEW

 

Examples of Processing Results:

Hidden Defects in Concrete

Pipe Detection

Pile Foundation Grillage

Engineering Geology

Railroads

Building Control

Municipal Engineering

Non-destructive Testing

Air Voids in the Soil

Illegal Tie-in Into Oil Pipeline

Archeology

Relief Map

3D Processing

Certificate:

Certificate of state registration program GEORADAR-EXPERT

Publications:

��������� 4 2010 �������

��� 2011

������ � ������ ������� �6 2015 ��� 73-78

������� ��� ���

���� ����. ������ 56, 2015 �.


 

GEORADAR-EXPERT VIDEO TUTORIALS

The following videos of the user's actions can be used to teach the work with the GEORADAR-EXPERT software, as well as demonstrate the possibilities of this software. At the beginning of each video, there is a summary of the content and e-mail address where you can contact the developers of the GEORADAR-EXPERT software.

On the video, clicking the left mouse button is displayed as a fading red ring around the mouse pointer, right-clicking as a fading blue ring. During the viewing of the video, explanations appear that are formed in the form of pop-up text comments and pointing elements (arrows, frames, etc.). While the comment is displayed, all other actions on the video are paused. If you do not have time to read the comment in full, you can put the video playback on pause.

The video control panel is located at the bottom of the playback window. By default, this panel is hidden. To display the control panel, move the mouse pointer to the bottom of the playback window:

The pause / play button is located on the left edge of the video control panel. When the video is played back, the button looks like this:  . When the video is paused, the button is displayed like this: . The button  from the right edge of the panel controls the size of the playback window. By default, the size of the playback window is small. If you click on the button , the window will be expanded to full screen. To exit full-screen mode, you need to press this button again, or press the Esc key on the computer keyboard.

Note: if in your browser, when clicking on the "Download" link the video file is not downloaded, but starts playback, you need to return to the video lessons page, click the download link with the right mouse button and, in the opened context menu, select the item "Save object as ..." .

Below are presented for downloading vides created during the consultations of the users of the GEORADAR-EXPERT software:

0008 - The Determination of the Thickness of River Bed Deposits (Added on April 28, 2017) WATCH THE VIDEO>>
(09 : 24)
DOWNLOAD>>
(31.9 MB)

0007 - Software update from March 15, 2017.
Automatic Gain Control (AGC),
Saving for ReflexW in  batch mode,
View processing history,
Block-by-block processing.   

WATCH THE VIDEO>>
(06 : 54)
DOWNLOAD>>
(26.41 MB)

0006 - Digital signal processing: interference reduction, resempling and improving data resolution. (Modified on May 11, 2017)

WATCH THE VIDEO>>
(14 : 49)
DOWNLOAD>>
(36.5 MB)

0005 - Features of the analysis of BSEF for long profiles and the use of batch mode for the analysis of BSEF and the creation of sections. 

WATCH THE VIDEO>>
(10 : 04)
DOWNLOAD>>
(17.5 MB)

0004 - Saving and exporting data of section.

WATCH THE VIDEO>>
(07 : 30)
DOWNLOAD>>
(15.79 MB)

0003 - Creating a section and settings of visualization.

WATCH THE VIDEO>>
(09 : 07)
DOWNLOAD>>
(25.57 MB)

0002 - Workspace and visualization settings.

WATCH THE VIDEO>>
(05 : 06)
DOWNLOAD>>
(14.56 MB)

0001 - How to load GPR data into the demo version GEORADAR-EXPERT.

WATCH THE VIDEO>>
(03 : 05)
DOWNLOAD>>
(9.35 MB)

Below are the video recordings of user actions when working in the 3D visualization mode, which corresponds to the section of the User's manual of the GEORADAR-EXPERT software "Three-dimensional visualization". Videos based on other sections of the User's Guide are under development and, once they are created, they will be available for viewing and downloading on this web page.

3D Visualisation

Part 1 Preparing of GPR Data.

WATCH THE VIDEO>>
(06 : 03)
DOWNLOAD>>
(13.9 MB)

Part 2 The table of coordinates and creating 3D assembly.

WATCH THE VIDEO>>
(07 : 02)
DOWNLOAD>>
(20.7 MB)

Part 3 Setup of parameters and control of 3D assembly.

WATCH THE VIDEO>>
(12 : 25)
DOWNLOAD>>
(31.6 MB)

Part 4 Rounding Data. Cross-section in the form of a contour plot.

WATCH THE VIDEO>>
(03 : 22)
DOWNLOAD>>
(11.8 MB)

Part 5 Range of visibility of 3D assembly. Isosurfaces.

WATCH THE VIDEO>>
(04 : 41)
DOWNLOAD>>
(15.6 MB)

Part 6 Correction of attribute values and information about 3D assembly.

WATCH THE VIDEO>>
(04 : 13)
DOWNLOAD>>
(10.5 MB)

Part 7 Spatial analysis of the 3D assembly attribute.

WATCH THE VIDEO>>
(05 : 57)
DOWNLOAD>>
(15.6 MB)

Part 8 Creating a user cross-section and logging trace.

WATCH THE VIDEO>>
(06 : 34)
DOWNLOAD>>
(15.1 MB)

 

 

© Denisov Roman 2009-2017

  �������@Mail.ru